Professional Phono/Mic Pre-amplifier
This compact professional grade moving magnet cartridge pickup and microphone pre-amplifier is specially designed for adding a turntable to a stereo amplifier that has no phono input or to add a Mic input to an amplifier. The phono pre-amp section features an extremely accurate RIAA record compensation response with very low noise and audio distortion. The Mic, pre-amp section is designed to accept both Dynamic and Condenser Mic or a low level input such as guitar or telephone pickup via a selection switch control. This high gain, low noise pre-amp is ideal for both home and professional Studio and broadcast application.
Features
Microphone and Phono pre-amp switched. Dynamic and Condenser Microphone switched Gold plated connectors throughout.TC-720
box content
Technical information
Input impedance: 47kOhms/Phono, 600 Ohms/MicrophoneInput impedance Input sensitivity: 3mVPhono mode, 0.3mV/Microphone Gain: 40dB both Phono and Microphone mode S/N Ratio: >75dB both phono and Microphone mode Equalization: RIAA +1dB to -3dB at 20hz-20Khz Frequency response: 20hz-20khz Output level : 200mV RMS Load impedance >10K Ohms Overload margin: 23dB Dimension 185mm (L) x:83mm (W) x 40mm (H)
Professional Phono/Mic Pre-amplifier
This compact professional grade moving magnet cartridge pickup and microphone pre-amplifier is specially designed for adding a turntable to a stereo amplifier that has no phono input or to add a Mic input to an amplifier. The phono pre-amp section features an extremely accurate RIAA record compensation response with very low noise and audio distortion. The Mic, pre-amp section is designed to accept both Dynamic and Condenser Mic or a low level input such as guitar or telephone pickup via a selection switch control. This high gain, low noise pre-amp is ideal for both home and professional Studio and broadcast application.
Features
Microphone and Phono pre-amp switched. Dynamic and Condenser Microphone switched Gold plated connectors throughout.TC-720
box content
Technical information
Input impedance: 47kOhms/Phono, 600 Ohms/MicrophoneInput impedance Input sensitivity: 3mVPhono mode, 0.3mV/Microphone Gain: 40dB both Phono and Microphone mode S/N Ratio: >75dB both phono and Microphone mode Equalization: RIAA +1dB to -3dB at 20hz-20Khz Frequency response: 20hz-20khz Output level : 200mV RMS Load impedance >10K Ohms Overload margin: 23dB Dimension 185mm (L) x:83mm (W) x 40mm (H)
Professional Phono/Mic Pre-
amplifier
This compact professional grade moving magnet cartridge pickup and microphone pre-amplifier is specially designed for adding a turntable to a stereo amplifier that has no phono input or to add a Mic input to an amplifier. The phono pre-amp section features an extremely accurate RIAA record compensation response with very low noise and audio distortion. The Mic, pre-amp section is designed to accept both Dynamic and Condenser Mic or a low level input such as guitar or telephone pickup via a selection switch control. This high gain, low noise pre-amp is ideal for both home and professional Studio and broadcast application.
Features
Microphone and Phono pre-amp switched. Dynamic and Condenser Microphone switched Gold plated connectors throughout.TC-720
box content
Technical information
Input impedance: 47kOhms/Phono, 600 Ohms/MicrophoneInput impedance Input sensitivity: 3mVPhono mode, 0.3mV/Microphone Gain: 40dB both Phono and Microphone mode S/N Ratio: >75dB both phono and Microphone mode Equalization: RIAA +1dB to -3dB at 20hz-20Khz Frequency response: 20hz-20khz Output level : 200mV RMS Load impedance >10K Ohms Overload margin: 23dB Dimension 185mm (L) x:83mm (W) x 40mm (H)
